A swim bag is a backpack, duffel or tote built to carry wet swimwear, towels, goggles and kit to and from the pool or open water without soaking everything else. The two features that matter most are a wet-dry separation, a waterproof compartment or removable wet bag that keeps damp kit away from clothes, phones and paperwork, and a way to dry out, through ventilation or a lining that can be emptied and wiped. Most swimmers need 20 to 35 litres; club and team swimmers with fins, paddles and kickboards often use 40 to 45 litre packs. This guide explains how to balance waterproofing against ventilation, what sizes suit which swimmer, and the waterproof swim bags we manufacture.
Any bag can carry a towel to the pool. The difference shows on the way home, when a wet suit and towel go back in beside dry clothes, a phone and a laptop, and the bag sits for an hour in a car or under a desk. Swim bags are built around that trip home.
Wet-dry separation comes first. A bag without a true wet compartment forces a damp suit and towel against dry clothes, electronics and paperwork. The best arrangement is either a waterproof compartment sealed off from the rest of the bag, or a removable waterproof wet bag that lifts out at home, gets emptied and dries on its own. Some designs combine both.
Drying out comes second, and it is where swim bags and waterproof bags pull in opposite directions. A completely sealed waterproof bag keeps water in as well as out, so wet gear left inside develops odours quickly. Ventilation, through mesh pockets, grommets or a ventilated base, helps damp kit dry on the way home. A welded waterproof bag deals with this differently: its smooth lining does not absorb water or chlorine, so once the wet kit is out, it can be wiped dry in seconds. Either way, the rule is the same: nothing wet stays in the bag overnight. The mechanism is explained in our article on mold on waterproof bags.
Protection for goggles comes third. Goggles crushed under a towel scratch and lose their seal. A dedicated padded or rigid pocket keeps them intact, and a clear pocket or window makes them easy to find.
For a recreational swimmer carrying a suit, towel, goggles, cap and toiletries, 20 to 25 litres is enough. Add a change of clothes and a laptop for a before-work swim, and 30 to 35 litres is more comfortable. Club and squad swimmers carrying fins, paddles, a pull buoy and a kickboard need 40 to 45 litres, and should check that the kickboard actually fits through the opening. Open-water swimmers and triathletes need space for a wetsuit, which is bulky and heavy when wet, and benefit most from a large waterproof compartment.
The inside of a swim bag needs to be waterproof to stop water getting out of the wet compartment. The outside needs to be waterproof for open-water swimmers, who leave bags on wet beaches, jetties and boat decks, and for anyone who cycles to the pool in the rain. A welded bag with a roll-top or airtight zipper handles both. For swimmers who want the phone in the water with them, an IPX8 phone pouch closes the gap; our guide Is the iPhone Waterproof? explains why a pouch is still worth having.
| Image | Model | Capacity | Dimensions (H × W × D) | Weight | Construction | Use |
|---|---|---|---|---|---|---|
|
SL-D693 | 15 / 20 L |
53 × 36 / 57 × 38 (flat) cm 20.9 × 14.2 / 22.4 × 15 in |
0.4–0.5 kg | Welded 500D PVC, roll-top with second film seal, clear window, internal wet-dry compartment, IPX7 | Pool and open-water kit: wet suit and towel apart from dry clothes |
|
SL-E978 | 38 L |
68 × 45 × 20 (flat) cm 26.8 × 17.7 × 7.9 in |
0.58 kg | Welded 500D PVC, roll-top with inner seal, removable wet bag, phone window, air valve, floats, IPX7 | Swim backpack for open water, lake and beach sessions |
|
SL-C878 | 20 L |
19 × 41.5 × 25 cm 7.5 × 16.3 × 9.8 in |
0.75 kg | Welded 840D TPU, airtight zipper, wipe-clean welded lining, internal zip pocket, front waterproof pocket, IPX7 | Travel and gym duffel that also suits swim kit; lining wipes dry in seconds |
|
SL-C594 | 55 L |
25 × 63.5 × 36 cm 9.8 × 25 × 14.2 in |
1.2 kg | Welded 500D PVC, three airtight zippers, two separate end compartments, smooth welded lining, IPX7 | Swim team and triathlon kit: fins, wetsuit and towels in the ends |
|
SL-A101 | Phones up to 6.5 in |
17.5 × 11 cm 6.9 × 4.3 in |
50–60 g | High-clarity PVC, press seal plus foam-lined flap, rear camera window, IPX8 | Phone at the poolside and in the water |
Dry bag dimensions are given flat, before the top is rolled. For more on wet-dry construction, see our article on wet-dry separation bags; for beach days, see our guide to the beach backpack.
Swim bags are a steady order for clubs, swim schools, triathlon teams and brands, often printed with a club crest or event logo. The details that earn good reviews are a properly sealed wet compartment that drains or wipes clean, a goggle pocket, a front mesh or ventilated pocket for caps, a kickboard-sized main opening and padded straps for children carrying their own kit. The details that cause complaints are wet compartments too small for a towel, linings that hold the smell of chlorine and zippers that corrode. We build swim bags with welded PVC or TPU wet compartments that do not absorb water or chlorine, sewn outer bags for lighter designs and fully welded bags for open water. Club logos can be screen printed, heat-transferred or applied as welded badges. The MOQ is 300 pieces per design, samples take 7 to 15 days and bulk production 30 to 45 days, quoted FOB Guangdong with Vietnam origin available. Sealock has over 20 years of experience making waterproof bags.
Empty it as soon as you get home, rinse the wet compartment in fresh water and leave it open to dry. A smooth welded lining holds far less smell than fabric or mesh.
20 to 25 litres for basic kit, 30 to 35 litres with clothes and a laptop, and 40 to 45 litres for club swimmers with fins, paddles and a kickboard.
Both, in different places. The wet compartment should be waterproof so it does not leak, and the bag should either ventilate or be easy to empty and wipe dry.
For the trip home, yes. Take it out, rinse it and hang it to dry as soon as you can; a wetsuit left sealed and wet will smell and degrade.
A fully waterproof roll-top or airtight-zipper bag, ideally one that floats, with a separate wet bag for the wetsuit.
Yes, from 300 pieces per design, screen printed, heat-transferred or as a welded badge.
Tell us the bag type, capacity, wet-dry layout, colours, logo and quantity you need, and we will reply within 24 hours with suitable base models, an FOB price and a sample timeline. Contact Sealock, or email info@sealock.com.hk.