Water-Resistant Camo Duffel Bag with Detachable Front Pouch (IPX6)

Sealock supplies the SL-C893 Water-Resistant Camo Duffel Bag, a fully welded duffel rated IPX6 that closes on a heavy-duty coated waterproof zipper with a moulded T-grip pull, featuring a detachable front accessory pouch, welded MOLLE-style lash strips, removable backpack straps and a heavy-duty abrasion base. Built in a high-definition concealment camo for hunting, boating and expedition use. OEM/ODM from MOQ 300, FOB Guangdong.

At a Glance

• Heavy-duty coated waterproof zipper — moulded T-grip pull, IPX6 on a welded body.
• Detachable front accessory pouch — its own waterproof zip, comes off when not needed.
• Welded lash strips — MOLLE-style slots that add gear without piercing the shell.
• Carry three ways — removable backpack straps, top haul handles, end grab handles.
• Heavy-duty abrasion base — takes being dropped in a boat, a blind or a truck bed.

Product Introduction

Sealock manufactures the SL-C893 Water-Resistant Camo Duffel Bag for hunters, anglers and expedition users who load gear into wet, rough places. As a welded waterproof-bag factory, we weld every seam of the body and close the main compartment with a heavy-duty coated waterproof zipper fitted with a moulded T-grip pull, so this water-resistant camo duffel keeps kit dry through heavy rain, spray and mud at an IPX6 rating. A detachable front accessory pouch, welded lash strips, removable backpack straps and a heavy-duty abrasion base make it a working field bag rather than a soft holdall — finished in a high-definition concealment camo.

Heavy-Duty Coated Zipper with T-Grip Pull

The main compartment runs a heavy-duty coated waterproof zipper the length of the bag, fitted with a moulded T-grip pull on a cord that gives you leverage to run it closed with cold, wet or gloved hands. Combined with the welded body — which has no needle holes anywhere in the shell — it holds an IPX6 rating: heavy rain, spray, mud and dust stay out. It is built for hard weather rather than submersion, so we do not rate it for immersion; for a fully submersible build we offer an airtight-zipper upgrade. We confirm every unit with a heavy rain and water-jet test appropriate to the IPX6 rating.

Detachable Front Accessory Pouch

A dedicated pouch mounts on the front of the bag on moulded attachment plates and carries its own waterproof zipper — so calls, tools, a headlamp or documents stay separate from the main load and reachable without opening the bag. Take it off when you want a clean profile for transport, or run it mounted as a permanent quick-access compartment.

Welded Lash Strips and Attachment System

Instead of stitched webbing, the front and top carry welded lash strips with MOLLE-style slots — attachment points bonded into the shell, so you can add pouches, straps, a rod tube or tools without a single needle hole through the waterproof body. Bungee cords with cord locks, moulded D-rings and hook-and-loop patch panels round out the system for lashing down a jacket, a decoy bag or team identification.

Carry It Three Ways

Removable padded backpack straps let you shoulder the full load on a long walk in, then come off for a clean duffel profile. Padded top haul handles pull together for a two-hand carry, and grab handles at each end make it easy to lift into a boat or a truck bed — or for two people to carry it loaded heavy.

Heavy-Duty Abrasion Base

The bottom is a reinforced abrasion panel — the surface that takes the punishment when the bag is dragged over gunwales, set down on gravel or slid across a truck bed. It is what keeps a weatherproof bag weatherproof after a few seasons of hard use.

1. Engineering Specifications

2. Material Specifications

3. Functional Specifications

4. Customization / OEM Specifications

Our OEM/ODM capability goes well beyond colour and logo changes: bring a sketch, a sample or a target spec — capacity, waterproof rating, fabric, zipper type, pouch and lash-strip layout — and our China base develops it from the ground up into a finished original product. Buyers who need a fully submersible version can specify our airtight-zipper construction. For camouflage programs we print to your own artwork or develop an original pattern with you; where a licensed camo pattern is required, the buyer supplies the licence and we produce to it.

5. Packaging Specifications

Recommended Use

Quality Inspection Standards

Inspection runs IQC on incoming printed laminate, zippers and hardware, IPQC on welds and zipper installation in process, and OQC before shipment with an AQL check, a batch rain/jet test and a signed golden-sample comparison. Third-party inspection (SGS / QIMA) is available on request.

Product Highlights

Printing & Logo Options

Brand it your way: welded patch, moulded rubber patch, silk-screen, heat-transfer and embroidery — plus the hook-and-loop panels for interchangeable patches. Custom camo prints and solid Pantone colours are available from MOQ.

OEM / ODM and Wholesale

As the factory, we supply the SL-C893 for OEM, ODM and wholesale buyers from an MOQ of 300 pcs, FOB Guangdong, with samples in 7–15 days and production in 30–45 days. We customize camo prints and colours, fabric, capacity, zipper type (including an airtight-zipper upgrade for a submersible build), pouch and lash-strip layout, harness configuration and your logo, and we offer full ground-up custom development. For a custom or wholesale waterproof duffel program under your own brand, send your spec and target quantity and we will quote against it.

Need a fully submersible travel duffel? See our 55L waterproof duffel bag with airtight zipper. Need a motorcycle version? See our waterproof motorcycle tail bag.

FAQ

How waterproof is it?

It is rated IPX6. The body is fully welded with no needle holes and the main compartment closes on a heavy-duty coated waterproof zipper, so it keeps out heavy rain, spray, mud and dust. It is not rated for submersion — for a fully submersible build we offer an airtight-zipper upgrade.

Can the front pouch and straps come off?

Yes. The front accessory pouch mounts on moulded attachment plates and detaches, and the padded backpack straps are removable — so you can run it as a full expedition pack or strip it back to a clean duffel.

Can you print our own camo pattern?

Yes. We print to your own artwork or develop an original pattern with you. Where a licensed camouflage pattern is required, the buyer supplies the licence and we produce to it.

What are the MOQ and lead times?

MOQ is 300 pcs, FOB Guangdong, with samples in 7–15 days and production in 30–45 days. Custom prints, colours and logos are available. Send your spec for a quote.

Request a Quote

Sealock (YiFuLong Outdoor Gear Co., Ltd.) has built welded waterproof gear in Guangdong since 2003. To order the SL-C893 or start an OEM/ODM program, send us your pattern, capacity, logo and target quantity for pricing and lead time. MOQ 300 pcs · samples 7–15 days · production 30–45 days.

YiFuLong Outdoor Gear Co., Ltd. (Sealock)
Email: info@sealock.com.hk · Tel: +86-13632981825