Compact Waterproof Fishing Sling Bag with Airtight Zipper (SL-E868A)

Sealock manufactures the Compact Waterproof Fishing Sling Bag with Airtight Zipper, model SL-E868A, for anglers who want sealed protection in a smaller, faster package. As a welded waterproof-bag factory, we close the main compartment with a genuine airtight waterproof zipper fitted with a moulded T-grip pull, and weld the body into a one-piece waterproof shell with no exposed stitching — so this waterproof sling bag keeps lures, reels, a phone and documents dry through rain, spray and immersion. At 23 × 15.5 × 45 cm it sits slim against the back, and a full external attachment set keeps rods and tools reachable without opening the bag.

At a Glance

• Airtight zipper with T-grip pull — sealed closure you can work one-handed.
• Welded one-piece waterproof interior — no needle holes, wipes out dry.
• Compact 23 × 15.5 × 45 cm — slim enough to stay clear of your cast.
• Full attachment set — side ladder straps, lash webbing, D-rings, patch panel.
• Sling carry — padded strap with stabilizer, swings forward for access.

Airtight Zipper with T-Grip Pull

The main compartment closes with a genuine airtight waterproof zipper — a sealed track, not a coated coil zip — and it is fitted with an oversized moulded T-grip pull on a cord. That grip is what makes the seal usable in the field: airtight zippers need real force to close fully, and a T-pull gives you leverage with wet, cold or gloved hands, so the bag actually gets sealed properly every time instead of left half-closed. We verify the seal on every unit with a full water-immersion test, submerging the closed bag for more than two hours and confirming the inside stays dry.

Welded One-Piece Waterproof Interior

Open it up and the interior is a single welded waterproof shell — smooth, seamless and free of stitch holes, so water has no path in and the inside wipes out dry after a wet session. An internal mesh zip pocket keeps small tackle, keys and cards organized against the back wall instead of loose at the bottom.

External Attachment Set

The outside carries the gear so the sealed compartment does not have to. Two adjustable ladder lash straps on the side mount a rod holder, a landing net or a rolled jacket; a vertical lash webbing strip and a moulded D-ring take pliers, a retractor, a light or a carabiner; and a hook-and-loop panel on the front holds brand, team or angler ID patches. Every anchor is welded or reinforced into the shell, so adding tools never breaks the waterproof body.

Sling Carry Built for Casting

A wide padded shoulder strap with a mesh facing carries the bag on your back, and a cross stabilizer strap with a quick-release buckle stops it swinging while you walk the bank or wade. When you need a lure, the bag rotates to your chest in one motion. A front waterproof zip pocket keeps a phone or licence sealed and instantly reachable, and a reinforced top handle makes it easy to lift into a kayak or hang on a rack.

1. Engineering Specifications

Item	Specification
Brand	SEALOCK
Model No.	SL-E868A
Product Name	Compact Waterproof Fishing Sling Bag
Product Type	Multifunctional Fishing Bag
Product Category	Waterproof Sling Bag / Tackle Bag
Construction Type	Structured Single-Shoulder Sling Pack
Manufacturing Process	High-Frequency Welded Seams
Waterproof Structure	Welded One-Piece TPU Body + Airtight Waterproof Zipper
Main Closure	Airtight Waterproof Zipper with Moulded T-Grip Pull
Waterproof Rating	IPX8 — submersible to 20 m
Dimensions	23 × 15.5 × 45 cm (L × W × H)
Capacity	approx. 12L
Net Weight	approx. 800 g
Front Pocket	Vertical Waterproof Zip Pocket
Interior	Welded Seamless Liner + Internal Mesh Zip Pocket
Attachment	Side Ladder Lash Straps ×2 · Front Lash Webbing · D-Ring · Hook-and-Loop Patch Panel
Carry System	Padded Single Sling Strap + Cross Stabilizer Strap + Top Grab Handle
Colour	Turquoise (shown) — custom colours available
Warranty	1 Year
Country of Origin	Guangdong, China

2. Material Specifications

Component	Material	Purpose
Outer Shell	840D Double-Coated TPU	Full waterproofing, abrasion and tear resistance
Interior Liner	Welded One-Piece TPU	Seamless waterproof interior, wipes out dry
Seams	High-Frequency Welded	Needle-hole-free joints for full waterproofing
Main Zipper	Airtight Waterproof Zipper	Seals the main compartment
Zipper Pull	Moulded T-Grip on Cord	Leverage to close the seal with wet or gloved hands
Pocket Zipper	Waterproof Zipper	Sealed quick-access front storage
Lash Straps	Moulded Ladder Straps with Buckles	Adjustable mounting for rod holder, net or layers
D-Ring & Lash Webbing	Reinforced Welded Anchors	Fixed points for tools, pliers and retractors
Patch Panel	Hook-and-Loop Field	Brand, team or ID patches
Internal Pocket	Mesh with Zip Closure	Organizes small tackle, keys and cards
Shoulder Strap	Foam-Padded Webbing with Mesh Facing	Comfortable single-shoulder carry
Stabilizer Strap	Nylon Webbing with Quick-Release Buckle	Stops the sling swinging while walking or wading
Handle	Reinforced Webbing	Lifting and hanging

3. Functional Specifications

Feature	Description
Submersible Protection	Airtight zipper on a welded one-piece body keeps tackle and electronics dry, including under immersion.
One-Handed Sealing	Moulded T-grip pull gives the leverage an airtight zipper needs, even with wet or gloved hands.
Swing-Round Access	Sling carry rotates the bag to the chest so you can change lures without taking it off.
External Gear Mounting	Ladder lash straps, lash webbing and a D-ring carry rods and tools outside the sealed body.
Sealed Quick Pocket	Front waterproof zip pocket keeps phone, licence and keys dry and instantly reachable.
Internal Organization	Mesh zip pocket keeps small items off the bottom of the main compartment.
Load Stability	Cross stabilizer strap holds the bag steady while walking, wading or casting.
Slim Profile	15.5 cm depth keeps the bag clear of the casting arm.
Patch Personalization	Hook-and-loop panel for interchangeable brand or angler patches.
Easy Maintenance	Coated TPU wipes clean of mud, salt water and fish slime.

4. Customization / OEM Specifications

Option	Available
Fabric Colour	Custom Pantone / multi-colour range
Fabric Type	840D double-coated TPU (standard) · alternative denier / PVC to spec
Capacity / Dimensions	Customizable
Waterproof Level	Airtight-zipper submersible build · configurable to target spec
Carry Configuration	Left / right sling · convertible dual-strap backpack
Rod Holder	Optional (mounts to ladder lash straps)
Tool / Pliers Sheath	Optional
Internal Divider / Tackle Tray	Optional
MOLLE / Laser-Cut Webbing	Optional
Reflective Trim	Optional
Logo Methods	Welded patch · Rubber patch · Silk-screen · Heat-transfer · Embroidery
Full Custom Development	Ground-up development from sketch, sample or target spec
MOQ	500 pcs
Sample Lead Time	7–15 days
Production Lead Time	30 days (1–500 pcs) · negotiable above 500 pcs
Supply Ability	15,000 pcs / month
Certifications	BSCI · ISO 9001 · Sedex
Factory Audit	Available
OEM / ODM	Supported

Our OEM/ODM capability goes well beyond colour and logo changes: bring a sketch, a sample or a target spec — capacity, IPX rating, fabric, zipper type, strap configuration and tackle layout — and our China base develops it from the ground up into a finished original product. Ground-up development needs longer lead time than a stock-colour change, so share your launch date and we will schedule sampling.

5. Packaging Specifications

Item	Details
Individual Packaging	1 pc / PP Bag
Carton Quantity	20 pcs / carton
Carton Type	5-Layer Export Carton
OEM Carton Printing	Available
Barcode Label	Available
Hang Tag / Care Label	Available (OEM)
Shipping Mark	Available
Pallet Packing	Optional
Port of Loading	Shenzhen

Recommended Use

Activity	Suitability
Lure / Bass Fishing	✔
Wade & Bank Fishing	✔
Kayak & Boat Fishing	✔
Surf / Saltwater Fishing	✔
Kayaking / Rafting	✔
Hiking / Day Carry	✔
Cycling / EDC	✔

Quality Inspection Standards

Inspection Item	Standard
Fabric Inspection	100%
Weld Seam Inspection	100%
Airtight Zipper Test	100%
Full Water-Immersion Test (2+ hours)	Batch sampling
Strap, Buckle & Handle Load Test	Random sampling
Lash Strap & D-Ring Pull Test	Random sampling
Colour Consistency	100% vs. signed sample
Appearance Inspection	100%
Carton Inspection	100%

Inspection runs IQC on incoming TPU, zippers and hardware, IPQC on welds and zipper installation in process, and OQC before shipment with an AQL check, a batch immersion test and a signed golden-sample comparison. The factory holds BSCI, ISO 9001 and Sedex, and third-party inspection (SGS / QIMA) is available on request.

Product Highlights

Feature	Advantage
Airtight Zipper + T-Grip Pull	A seal that actually gets closed properly in the field
Welded One-Piece Interior	No needle holes; wipes out dry after a wet session
Compact 23 × 15.5 × 45 cm	Slim on the back and clear of the casting arm
Full External Attachment Set	Rods and tools ride outside without piercing the shell
Internal Mesh Zip Pocket	Small tackle stays organized, not loose at the bottom
BSCI / ISO 9001 / Sedex	Audited supply chain, ready for retail and chain programs

Printing & Logo Options

Brand it your way: welded patch, moulded rubber patch, silk-screen, heat-transfer and embroidery — plus the hook-and-loop panel for interchangeable patches — in custom Pantone colours.

OEM / ODM and Wholesale

As the factory, we supply the SL-E868A for OEM, ODM and wholesale buyers from an MOQ of 500 pcs, FOB Shenzhen, with production in 30 days for 1–500 pcs and negotiable lead time above that, backed by a capacity of 15,000 pcs per month and a one-year warranty. We customize colours, fabric, capacity, zipper configuration, strap and tackle layout, MOLLE and your logo, and we offer full ground-up custom development. For a custom or wholesale fishing sling bag program under your own brand, send your spec and target quantity and we will quote against it.

Need more capacity? See our 15L IPX8 fishing sling bag. Prefer a lighter PVC sling? See our 8L waterproof fishing sling bag.

FAQ

How waterproof is it?

The body is welded into a one-piece waterproof shell with no needle holes and sealed by a genuine airtight waterproof zipper, and every unit is verified with a full water-immersion test of more than two hours before shipping.

What is the T-grip pull for?

Airtight zippers need real force to close completely. The moulded T-grip on a cord gives you that leverage with wet, cold or gloved hands, so the seal closes properly every time.

Can I mount a rod holder and tools?

Yes. Two adjustable ladder lash straps on the side plus front lash webbing and a D-ring take a rod holder, net, pliers or retractor — all anchored into the shell without piercing the waterproof body.

What are the MOQ, lead time and certifications?

MOQ is 500 pcs, FOB Shenzhen, with production in 30 days for 1–500 pcs and a capacity of 15,000 pcs per month. The factory holds BSCI, ISO 9001 and Sedex, and the bag carries a one-year warranty.

Request a Quote

Sealock (YiFuLong Outdoor Gear Co., Ltd.) has built welded waterproof gear in Guangdong since 2003, with BSCI, ISO 9001 and Sedex certification. To order the SL-E868A or start an OEM/ODM program, send us your colours, capacity, logo and target quantity for pricing and lead time. MOQ 500 pcs · production 30 days (1–500 pcs) · 15,000 pcs/month capacity · FOB Shenzhen.

YiFuLong Outdoor Gear Co., Ltd. (Sealock)
Email: info@sealock.com.hk · Tel: +86-13632981825