Genuine airtight waterproof zipper — IPX7 sealing on a welded TPU body.
Three ways to use it — strap it to the bike, wear it as a backpack, or carry by hand.
Removable accessory system — harness board, quick-release straps, shoulder strap, phone pouch.
Patented design — registered appearance-design patent.
55L, tough and visible — 420D/501D TPU, reflective panels, number-plate patch.
Sealock manufactures the 55L 3-Way Motorcycle Waterproof Bag with Airtight Zipper, model SL-E984, for riders who need one bag that straps to the bike for the ride and converts for the walk from the car park. As a welded waterproof-bag factory, we seal the main compartment with a genuine airtight waterproof zipper — not a coated coil zip — and weld the 420D/501D TPU body into a shell with no stitch holes, giving this motorcycle waterproof bag an IPX7 rating. A removable accessory system turns the same 55L body into a tail bag, a backpack or a hand-carry duffel, and the design is protected by a registered appearance-design patent.
The main compartment closes with a genuine airtight waterproof zipper across the top, and every seam of the 420D/501D TPU body is high-frequency welded with no needle holes. That is what earns the IPX7 rating — real sealing that keeps riding gear, electronics and a change of clothes dry through a full day of highway spray and rain, not just a light shower. We verify the seal on every unit with a full water-immersion test, submerging the closed bag for more than two hours and confirming the inside stays dry.
The SL-E984 is built around a "strap, back, carry" concept. Quick-release straps lash it securely to a motorcycle rear seat or luggage rack for the ride; a removable padded harness board with shoulder straps clips on to turn it into a backpack for the trail or the terminal; and grab handles carry it by hand like a duffel. Switching modes takes seconds, so the same waterproof body works from the bike to the boat to the airport.
Everything that makes the bag convertible is removable, so you only carry what the trip needs:
Reflective panels and piping lift night visibility on the road, a hook-and-loop patch panel with a "55" number plate takes brand or ID patches, side bungee cords stash a jacket or a helmet lock, and multiple compression straps and D-rings cinch the load and give clip-on points. The body holds its shape strapped down so it does not balloon in the wind at speed.
| Item | Specification |
|---|---|
| Brand | SEALOCK |
| Model No. | SL-E984 |
| Product Name | 3-Way Motorcycle Waterproof Bag (Strap / Backpack / Carry) |
| Product Category | Motorcycle Waterproof Bag / Waterproof Duffel |
| Construction Type | Cylindrical Waterproof Duffel with Convertible Carry |
| Manufacturing Process | High-Frequency Welded Seams |
| Waterproof Structure | Welded TPU Body + Airtight Waterproof Zipper |
| Main Closure | Airtight Waterproof Zipper |
| Waterproof Rating | IPX7 |
| Capacity | 55L |
| Dimensions | 57 × 32 × 26 cm (L × W × H) |
| Net Weight | 1.27 kg |
| Carry Modes | Strap-On (bike) · Backpack · Hand-Carry |
| Removable Accessories | Quick-Release Straps ×4 · Padded Harness Board · Shoulder Strap · Phone Pouch |
| Reflective | Reflective Panels & Piping |
| Exterior | Number-Plate Patch Panel · Side Bungee Cords · Compression Straps · D-Rings |
| Design Protection | Registered Appearance-Design Patent |
| Colour | Navy · Mouse Grey |
| Country of Origin | Guangdong, China |
| Component | Material | Purpose |
|---|---|---|
| Outer Shell (Grey) | 420D Ripstop TPU-Laminated Fabric | Waterproofing with abrasion and tear resistance |
| Outer Shell (Navy) | 501D Ripstop TPU-Laminated Fabric | Waterproofing with abrasion and tear resistance |
| Seams | High-Frequency Welded | Needle-hole-free joints for IPX7 sealing |
| Main Zipper | Airtight Waterproof Zipper | Seals the main compartment |
| Harness Board | Moulded Foam Padding with Fabric Cover | Removable backpack support |
| Quick-Release Straps | Nylon Webbing with Side-Release Buckles | Lashing the bag to a bike or rack |
| Shoulder Strap | Foam-Padded Webbing | Single-shoulder and hand carry |
| Phone Pouch | TPU with Clear Window | Sealed quick-access phone storage |
| Bungee Cords | Elastic Cord with Locks | External stash for jacket or helmet lock |
| Reflective Trim | Reflective Film & Piping | Night visibility on the road |
| Hardware | D-Rings · Compression Buckles | Load cinching and accessory attachment |
| Feature | Description |
|---|---|
| Waterproof Protection (IPX7) | Airtight zipper on a welded TPU body keeps gear dry through highway spray, rain and brief immersion. |
| 3-Way Conversion | Strap to the bike, wear as a backpack, or carry by hand — switch in seconds. |
| Removable Accessories | Harness board, quick-release straps, shoulder strap and phone pouch come off when not needed. |
| Secure Bike Mounting | Quick-release straps lash the bag firmly to a rear seat or rack. |
| Night Visibility | Reflective panels and piping catch headlights on the road. |
| External Stash | Side bungee cords and D-rings carry a jacket, helmet lock or tools. |
| Load Stability | Compression straps keep the bag from ballooning in the wind at speed. |
| Patented Design | Registered appearance-design patent protects the look. |
| Easy Maintenance | TPU surface wipes clean of road grime, mud and salt. |
| Option | Available |
|---|---|
| Fabric Colour | Navy · mouse grey · custom Pantone |
| Fabric Type | 420D / 501D TPU (standard) · alternative denier to spec |
| Capacity / Dimensions | Customizable |
| Zipper Type | Airtight waterproof (standard) · water-resistant laminated |
| Carry Configuration | Strap / backpack / carry modules configurable |
| Mounting Straps | Length and buckle type to spec |
| Phone Pouch | Included · size options |
| MOLLE / Lash Webbing | Optional |
| Reflective Trim | Standard · extendable |
| Logo Methods | Welded patch · Silk-screen · Heat-transfer · Rubber patch · Embroidery |
| Full Custom Development | Ground-up development from sketch, sample or target spec |
| MOQ | 300 pcs |
| Sample Lead Time | 7–15 days |
| Production Lead Time | 30–45 days |
| Factory Audit | Available |
| OEM / ODM | Supported |
Our OEM/ODM capability goes well beyond colour and logo changes: bring a sketch, a sample or a target spec — capacity, IPX rating, fabric, zipper type, mounting-strap and carry-module layout — and our China base develops it from the ground up into a finished original product. Note that this model's appearance is patent-protected; we develop distinct original designs for OEM partners rather than copying protected artwork.
| Item | Details |
|---|---|
| Individual Packaging | PE / PP Bag |
| Carton Type | 5-Layer Export Carton |
| OEM Carton Printing | Available |
| Barcode Label | Available |
| Hang Tag / Care Label | Available (OEM) |
| Shipping Mark | Available |
| Pallet Packing | Optional |
Lashes securely onto rear seats or luggage racks, keeping gear dry through high-speed highway rain.
55L high-capacity TPU shell carries sleeping bags, tents and tools securely through muddy campsites.
Air-tight IPX7 zipper seals out road dust, grit and rain when mounted on open vehicle racks.
Removable padded harness board converts the duffel into a comfortable backpack in seconds.
Welded seamless body survives boat deck washes and brief submersion without leaking water inside.
| Inspection Item | Standard |
|---|---|
| Fabric Inspection | 100% |
| Weld Seam Inspection | 100% |
| Airtight Zipper Test | 100% |
| Full Water-Immersion Test (2+ hours) | Batch sampling |
| Strap, Buckle & Harness Load Test | Random sampling |
| Accessory Fit & Quick-Release Check | Random sampling |
| Colour Consistency | 100% vs. signed sample |
| Appearance Inspection | 100% |
| Carton Inspection | 100% |
Inspection runs IQC on incoming TPU fabric, zippers and hardware, IPQC on welds and zipper installation in process, and OQC before shipment with an AQL check, a batch immersion test and a signed golden-sample comparison. Third-party inspection (SGS / QIMA) is available on request.
| Feature | Advantage |
|---|---|
| Airtight Waterproof Zipper | True IPX7 sealing for highway spray and rain |
| 3-Way Convertible Carry | One bag for the bike, the back and the hand |
| Removable Accessory System | Carry only what the trip needs |
| 420D / 501D TPU | Tough, tear-resistant ripstop shell |
| Patented Design | Registered appearance-design patent |
| Reflective & Rider-Ready | Night visibility and secure bike mounting |
Brand it your way: welded patch, silk-screen, heat-transfer, rubber patch and embroidery — plus the hook-and-loop number-plate panel for interchangeable patches.
As the factory, we supply the SL-E984 for OEM, ODM and wholesale buyers from an MOQ of 300 pcs, FOB Guangdong, with samples in 7–15 days and production in 30–45 days. We customize colours, fabric, capacity, zipper type, mounting straps, carry modules and your logo, and we offer full ground-up custom development. For a custom or wholesale motorcycle bag program under your own brand, send your spec and target quantity and we will quote against it.
It is rated IPX7 with a genuine airtight waterproof zipper on a fully welded 420D/501D TPU body, verified with a full water-immersion test of more than two hours. It keeps gear dry through highway spray, rain and brief immersion.
Quick-release straps lash it to the bike; a removable padded harness board with shoulder straps turns it into a backpack; and grab handles carry it as a duffel. All the carry hardware is removable.
The bag plus the removable accessory set: four quick-release straps, the padded harness board with shoulder straps, a shoulder strap and a phone pouch.
MOQ is 300 pcs, FOB Guangdong, with samples in 7–15 days and production in 30–45 days. Two stock colours plus custom colours and logos are available. Send your spec for a quote.
Sealock (YiFuLong Outdoor Gear Co., Ltd.) has built welded waterproof gear in Guangdong since 2003. To order the SL-E984 or start an OEM/ODM program, send us your colours, capacity, logo and target quantity for pricing and lead time. MOQ 300 pcs · samples 7–15 days · production 30–45 days.
YiFuLong Outdoor Gear Co., Ltd. (Sealock)
Email: info@sealock.com.hk · Tel: +86-13632981825